Termékek pp ediment szűrő anyag 5 mikron (24)

Osmocem SCK Fiber-reinforced monocomponent cement mortar, based on hydraulic binders, superprogoline fillers, selected fine aggregates and crystallizing reagent agents, which favor the penetration of the compound into the support. Ideal for low-thickness protective coatings (4 to 10 mm), with high counterweight adhesion. The specific formulation makes this product ideal for coatings in aggressive environments in contact with chlorides and sulphates (sewage systems). Packaging: 25 kg bag UM: €/kg

TRADIUM liefert besonders reines und hochwertiges Gallium ab Lager in Frankfurt/M. Lieferbare Formen - Gallium-Metall - Galliumoxid - Galliumchlorid - Galliumnitrat Lieferzeiten Gallium ist in verschiedenen Qualitäten und Reinheiten prompt ab Lager in Frankfurt am Main lieferbar Benötigen Sie Gallium mit besonderen Lieferformen oder Spezifikationen? Dann kontaktieren Sie uns! Wir helfen Ihnen gerne bei Ihrem Anliegen. Ihr Ansprechpartner für Gallium ist: Matthias Rüth Tel.: +49 (0)69 50 50 250 - 250 Wir freuen uns auf Ihre Anfrage!

Sodium Isopropyl Xanthate (SIPX)

Nº Permis de Commerce Paralelle: 2200593 Composition: Soufre : 800 g/L

INSULIN DETEMIR

MFI (g/10 min (230°C/2.16 kg) -2,5- 3,5 Produktform: Granulat 2-5mm Verpackung: Sack 25 kg Preis:0,85/kg Nur 5t. Lager: 42555 Velbert Deutschland

Pigment, Rutile / Anatase

CATAFLAM 50 MG 20 TAB

Subutex enthält den Wirkstoff Buprenorphin und wird zur Behandlung von Opioidabhängigkeit eingesetzt. Es handelt sich um eine sublinguale Tablette, die unter die Zunge gelegt wird, wo sie sich auflöst und den Wirkstoff langsam freisetzt. Buprenorphin ist ein partieller Opioid-Agonist, der hilft, Entzugssymptome zu lindern und das Verlangen nach Opioiden zu reduzieren, ohne die intensiven euphorischen Effekte zu verursachen, die mit missbräuchlichen Opioiden verbunden sind. Die empfohlene Anfangsdosis wird individuell vom Arzt festgelegt, wobei die Behandlung in der Regel unter ärztlicher Aufsicht beginnt. Subutex kann sowohl in der Einleitungs- als auch in der Erhaltungsphase der Behandlung verwendet werden. Die Anwendung von Subutex sollte im Rahmen eines umfassenden Behandlungsplans erfolgen, der auch psychosoziale Unterstützung und Beratung umfasst. Zu den häufigsten Nebenwirkungen gehören Kopfschmerzen, Übelkeit, Schwitzen und Schlafstörungen.

Hersteller Kjellberg Finsterwalde Elektroden u. Werksnr. 00.131.253.000 Normbezeichnung DIN EN ISO 2560A E 42 2 B 12 H 10 AWS A 5.1 E 7016 niedriglegiert, dick basischumhüllt mit nichtbasischen Anteilen Eigenschaften und Anwendungsgebiete Universalelektrode, einsetzbar in Industrie und Handwerk für Montage und Reparaturschweißungen von un und niedriglegierten Stählen besonders hervorzuheben ist die gute Verschweißbarkeit in Zwangslagen und an Wechselstrom Grundwerkstoffe* allg. Baustähle S 235 bis S 355 Feinkornbaustähle S 275 bis S 420 Schiffbaustähle A32/36, D32/36, E32/36, A40, D40, E40 Druckbehälterstähle P 195 bis P 355 Rohrstähle L 210 bis L 360 Stahlguss GE200, GE240, GP 240, G20Mo5, G21Mn5 Betonstahl BSt 420, BSt 500 *Umfang der Eignung hinsichtlich besonderer Eigenschaften und Zulassungsumfang prüfen Artikelnummer:1205751055 Gewicht:4,3 kg Länge:350 mm EN ISO:E 38 2 B 12 Ø:2,5 mm Umhüllung:basisch Marke:KJELLBERG Inhalt:216 Stück Legierung:niedriglegiert Zolltarifnummer:83111000 Ursprungsland:Deutschland Versand:Paketdienst KS-Schl:SG07 EAN:4251913300411

Glukosesirup ist ein wichtiger Rohstoff für die Süßwaren- und Marmeladenindustrie, sowie für die Feinbäckerei und die Konfisserie. Der 45° Glukosesirup lässt sich mit der bloßen Hand zur Kugel formen, da er durch seinen höheren Trockenmassegehalt fester ist. Er kann somit z.B. gut für Kuchenglasuren, Pralinen, Modellierschokolade, Bonbons und Speiseeis verwendet werden.

Dollmar distribuisce zeoliti, prodotti che trovano applicazione come deumidificanti nella produzione di schiume poliuretaniche rigide e flessibili, elastomeri, prodotti vernicianti, adesivi e sigillanti.

CAS-Nr.: [9012-36-6] EINECS: 232-731-8 Shipping condition: ambient. CAS Nr:[9012-36-6] Code:01147 Manufacturers:Nacalai

Complemento alimenticio a base de cúrcuma La cúrcuma tiene propiedades antioxidantes. ​ Ayuda a mantener la salud hepática, la salud pulmonar, el sistema inmunitario y la función normal del sistema nervioso. ​ También apoya la función cardiaca y la circulación sanguínea. INGREDIENTES:Cúrcuma liposomada (Curcuma Longa) estandarizada >95%, liposoma MODO DE EMPLEO:tomar 1 o 2 cápsulas al día con un gran vaso de agua. CONDICIONES DE CONSERVACION:consérvese en un lugar fresco y seco.

Bain à immersion dissolvant sans acétone. Agiter avant emploi. Référence:IT10/SO0005

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Osmocem N gray Cement compound for the preparation, with the sole addition of water, of a waterproofing osmotic coating that can create horizontal and vertical barriers, also suitable in conditions of negative hydrostatic thrust vis-à-vis water permeation in the buildings. Typical uses include waterproofing underground rooms, elevator compartments, garages, basements, tanks, etc. The action of the active components and of the adhesion promoters of Osmocem N, saturated by the reaction the support capillaries, forming a complex system of gel and stable crystals, which results in the best sealing, effective even in conditions of negative hydrostatic thrust, without hindering the breathability of the walls. Osmocem N is compatible for food substances: is certified as suitable for the containment of foodstuffs and drinking water (Certificate no. 02/2010 Laboratorio Analysis Service di Settimo di Pescantina - VR). Osmocem N waterproof test: • Resistance to positive hydraulic thrust, UNI EN 12390/8: water penetration depth with 5 bar pressure = 1-2 mm (*) • Impermeability to negative hydraulic thrust, UNI EN 12390/8 modified (concrete support a / c ratio 0.7): no passage of water with a pressure of 1.5 bar (*) concrete with penetration depth <= 20 mm are considered waterproof. Waterproofing rigid structures and masonry walls underground, buried or in any case subject to water permeation: lift wells, basements, tanks, pipes, tunnels, garages, bridges, reservoirs, areas containing food, etc. in conditions of positive and negative hydrostatic thrust provided they are sufficiently porous and absorbent and free from any waterproofing and / or water-repellent surface treatment, whether chemical (siloxanes, epoxies, polyurethanes, etc.) or natural (wax-up). Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., water repellent treatments in general, etc. conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer, add Osmocem N and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 19-20% (for interventions in the form of a spatula) or 21-22% (for interventions using a brush with long bristles). After mixing is completed wait a few minutes before applying. If applied by brush, roll out two or more crossed coats. Although it is not a specific product for finishing thick coats, it can still be used for these purposes. In these cases, it is appropriate to use a fibreglass mesh Armaglass 160. Approximately 1.7 kg/m² of Osmocem N for each millimetre of thickness to be made. Packaging: 25 kg bag UM: €/kg

Engrais organique et organomineral provenant des engrais minéraux avec fumier des brebis, exempt de mauvaises herbes et d’agent pathogènes. Formulation presentée sous forme granulée. Composition : Azote total (N) : 6 % Anhydride phosphorique (P2O 5) : dix % Oxyde de potassium (K2O) : 20 % Soufre (S) : 5,9 % Magnésium (Mg) : 3% Fer (Fe) : 0,1% Matière organique totale : 15 % Extrait humique : 8 %

Solvent

Application: ElectrophoresisGenetic testing : Amides Storing temperature: 2-8°C GHS pictogram: GHS06GHS08 Shipping condition: ambient Synonym: Propensäureamid 2-Propenamid Acrylsäureamid IUPAC: Prop-2-enamide Appearance: clear colorless solution UNSPSC-No: 41105319 Code:1807 Manufacturers:GERBU

SUTENT 50 MG 14 CAPSULE

NPT, Giovanni Randi

Application: Protein Technologies : Peptides CAS-Nr.: [9087-70-1] Storing temperature: -20°C GHS pictogram: GHS08 EINECS: 232-994-9 Activity: >3.0EPU/mg IUPAC: 4-[[1-[[29a,62a,69,84-tetrakis(4-aminobutyl)-35a,75,78-tris(2-amino-2-oxoethyl)-14a-(3-amino-3-oxopropyl)-8a,41a,72-tribenzyl-50a,53a-di(butan-2-yl)-47a,48,56a,81,90-pentakis(3-carbamimidamidopropyl)-31,60-bis(2-carboxyethyl)-42-[[2-[[2-(1-carboxyethylamino)-2-oxoethyl]amino]-2-oxoethyl]carbamoyl]-57-(carboxymethyl)-11a,13,45-tris(1-hydroxyethyl)-66-(hydroxymethyl)-2a,16,38a,44a-tetrakis[(4-hydroxyphenyl)methyl]-26a,32a,59a,63,87-pentamethyl-20a,34-bis(2-methylpropyl)-51-(2-methylsulfanylethyl)-1a,3,4a,7a,9,10a,12,13a,15,16a,18,19a,22a,24,25a,28a,30,31a,33,34a,36,37a,40a,43a,44,46a,47,49a,50,52a,53,55a,56,58a,59,61a,62,64a,65,68,71,74,77,80,83,86,89,92,95,98-pentacontaoxo-5a-propan-2-yl-39,40,66a,67a,70a,71a-hexathia CAS Nr:[9087-70-1] Code:1302 Manufacturers:GERBU

Solvent